Windowsill Paint

£47.66 Sale Save
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint
Windowsill Paint

Windowsill Paint

£47.66 Sale Save
CHOOSE YOUR SIZE 1 Litre
CHOOSE YOUR FINISH Simply Stone
Need help selecting which range? Use our Online Product Selector or call us on 01405 720281 for our recommendations.

Paint Calculator

The weather can leave the exterior of your home looking old, tired and pretty unslighty.

Windowsill Stone Coating is a water-based, high performance, stone effect paint which has been specially developed for transforming the exterior elements of your home into beautiful stone effect features.

Suitable for application onto old, weathered and pre-painted surfaces including, stone, concrete and wooden windowsills, lintels, quoin stones, window frames, doors and door surrounds, mullions and architecural mouldings.

  • Quick & easy to use
  • Very hard wearing, breathable, weather resisitant and UV stable
  • Provides an authentic finish that really does look and feel like natural stone, at a fraction of the cost
  • Environmentally friendly - water based, low VOC.

The unique ground-stone formulation of Windowsill Stone Coating makes it ideal for both keeping the outside of your home looking neat and clean.

 

Further Information

Suitable Materials

  • Wood & Wood Finishes
  • Marble
  • Plaster
  • Masonry & Brickwork
  • Granite
  • MDF
  • Stone
  • Tiles
  • Resin
  • Concrete
  • Pre-Painted Surfaces

Properties

Drying Time: In normal drying conditions allow a minimum of hours drying time between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.
Composition: Water-based
Coverage: 1 litre will complete (with the recommended 3 coats) an area approximately 2.5 meters squared. Coverage can vary depending on the condition and porosity of the substrate.
VOC Content: Minimal VOC content. This product contains max 6g/l VOC.

Application

SURFACE PREPARATION

Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. Sane pre-painted and glossy surfaces. Apply at least one coat of Stonelux Primer & Undercoat.

BRUSH/ROLLER APPLICATION

Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.

SPRAY APPLICATION

Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.

APPLICATION TIPS

  • Apply a minimum of 3 coats
  • Use an economy natural bristled brush
  • Drying time can be reduced by circulating warm air around the painted surface

LIMITATIONS

Do not apply in rain, temperatures below 10 degrees Celsius  or above 30 degrees Celsius or if exposure to these conditions is likely during the 72 hours curing time. 

    Downloads

    Technical Data Sheet:

    Material Safety Data Sheet:

    Fireplace Stone Coating Product Leaflet:

    Application Guide:

    Composition

    • Water-based Formula: Eco-friendly and low odour
    • Infused with Natural Ground Stone: Ensures a natural authentic stone appearance

    Application

    • Suitable for Interior and Exterior use.
    • Adheres to a wide range of substrates including: concrete, bricks, stone, wood, MDF, GRC, fibreglass, pre-painted surfaces, tiles, resin and more.

    Durability and Ease of Maintenance

    • Resistant to fading, chipping and peeling.
    • Easy to clean with mid detergent and water.

    Coverage and Application

    • Covers up to 7.5m² per litre (per coat), varying by substrate and color.
    • Apply with brush, foam roller, or spray; requires at least one coat of Stonelux Primer.

    Drying Time

    • Touch-dry and re-coatable in 2-3 hours. Weather resistant in 72 hours. Fully cured in 7 to 14 days.

    Availability

    • Offered in a range of sizes: 1 litre, 2.5 litres, 5 litres, 10 litres and 20 litres.

    For application instructions and other information, please refer to the Technical Data Sheet.

    1. Preparation: Before starting your project, ensure the surface is clean, sound, and dry. If you're working on pre-painted or glossy surfaces, sand them to create a suitable key for the paint. Any damage should be repaired with a suitable filler. For optimal results, apply at least one coat of Stonelux Primer to the prepared surface.
    2. Application: Stir The Stone Range paint well before use. You can apply it using an economy natural bristled brush, foam roller, or spray equipment. For consistent and thorough coverage, apply a minimum of three coats. Be careful to avoid overspreading the paint and refrain from over-brushing or rolling. If brush marks remain visible, finish the surface with stippling. Allow 2-3 hours of drying time between each coat.
    3. Spraying: If you choose to spray the paint, use a minimum nozzle size of 1.8mm. The paint can be diluted with no more than 20% water for spraying applications.
    4. Finishing: After applying the final coat, ensure that the paint is fully dry before touching or applying any pressure to the surface. The paint should be touch dry before applying subsequent coats.

    Colours displayed on screen will vary from colour of paint - we recommend ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

    AVAILABLE COLOURS

    Colours displayed on screen will vary from colour of paint - we recommend requesting a hand-paint colour chart or ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

    AVAILABLE FINISHES

    Colours displayed on screen will vary from colour of paint - we recommend requesting a hand-paint colour chart or ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

    SIMPLY STONE

    SIMPLY STONE™ contains high-quality ground stone to create an authentic matt stone finish that compliments both traditional and contemporary designs.  The uniform texture and colour provides a warm and inviting natural look that maintains all the class and character of traditional stonework.

    STONE FLECKS

    The same beautiful textured finish as SIMPLY STONE™, but with additional stone flecks for a more naturally speckled appearance.  STONE FLECKS™ creates a stone finish full of depth that will add immense character, warmth and authenticity to any project.

    ANTIQUED STONE

    A classic stone finish that contains natural ground stone, combined with large stone flecks to create a simulated aged stone appearance. The prominence of the flecks provides the appearance of stonework that has been naturally altered by the passage of time, for a worn rustic feel with vintage charm.

    SMOOTH STONE

    The least textured of our stone finishes acquires its elegant stone appearance from natural stone flecks. Creates a matt stone effect finish that is naturally lighter in texture, uniform in colour and has a soft appearance that is pleasing to both the eye and touch.

    CUSTOMER REVIEWS