Garden Paint

£26.61 Sale Save
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint
Garden Paint

Garden Paint

£26.61 Sale Save
CHOOSE YOUR SIZE 500ml
CHOOSE YOUR FINISH Simply Stone
Need help selecting which range? Use our Online Product Selector or call us on 01405 720281 for our recommendations.

Paint Calculator

A high performance, stone effect paint, that gives a stone effect to garden items, such as, terracotta pots, wooden planters, garden ornaments, concrete, fence posts and balustrades.

Our water-based, durable and weather resistant paint looks and feels like natural stone, at a fraction of the cost.

  • Unique ground stone formulation creates a truely authentic stone finish.
  • The appearance of real stone at a fraction of the cost.
  • Decorative, hard wearing and UV stable
  • Weatherproof
   

Further Information

Suitable Materials

  • Wood & Wood Finishes
  • Concrete
  • Terracotta
  • Masonry & Brickwork
  • Stone
  • MDF
  • Pre-painted Surfaces
  • Tiles
  • Resin
  • Pre-Painted Surfaces

Properties

Drying Time: In normal drying conditions allow a minimum of hours drying time between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.
Composition: Water-based
Coverage: 1 litre will complete (with the recommended 3 coats) an area approximately 2.5 meters squared. Coverage can vary depending on the condition and porosity of the substrate.
VOC Content: Minimal VOC content. This product contains max 6g/l VOC.

Application

By Brush

  1. Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
  2. Using a natural soft bristled brush, apply an even, full, coat of Primer in the correct shade, to all surfaces. Allow 1-3 hours to dry depending on conditions. A second coat of primer can be applied where there is a significant colour change.
  3. Using a natural soft bristled brush, lay an even, thin coat of StoneLux onto the surface. Do not over brush. Apply a MIMIMUM of 3 coats, allowing 1 - 3 hours drying time between coats, depending on conditions. If brush strokes remain, finish with light brush strokes or stippling. Fully cured in 72 hours.

By Spray

  1. Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
  2. Using a gravity fed spray gun, apply an even, full, coat of primer in the correct shade to all surfaces. Wet film thickness should be between 150 and 200µm with no over coating on corners or joints. Allow 1 to 3 hours drying time, depending on conditions.
  3. Using a gravity fed spray gun, apply 2 - 3 even, full, coat of StoneLux to all surfaces. Wet film thickness should be between 300 and 500µm with no over coating on corners or joints. Allow 2-3 hours to dry, depending on conditions. Fully cured in 72 hours.
  • Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish).
  • If using a gravity fed gun, use a nozzle size between 1.8-2.5mm using a texture gun, use a nozzle size between 2-5mm.
  • If necessary, StoneLux can be diluted, using no more than 20% water.
 
 

Downloads

Technical Data Sheet:

Material Safety Data Sheet:

Garden Stone Coating Product Leaflet:

 

Composition

  • Water-based Formula: Eco-friendly and low odour
  • Infused with Natural Ground Stone: Ensures a natural authentic stone appearance

Application

  • Suitable for Interior and Exterior use.
  • Adheres to a wide range of substrates including: concrete, bricks, stone, wood, MDF, GRC, fibreglass, pre-painted surfaces, tiles, resin and more.

Durability and Ease of Maintenance

  • Resistant to fading, chipping and peeling.
  • Easy to clean with mid detergent and water.

Coverage and Application

  • Covers up to 7.5m² per litre (per coat), varying by substrate and color.
  • Apply with brush, foam roller, or spray; requires at least one coat of Stonelux Primer.

Drying Time

  • Touch-dry and re-coatable in 2-3 hours. Weather resistant in 72 hours. Fully cured in 7 to 14 days.

Availability

  • Offered in a range of sizes: 1 litre, 2.5 litres, 5 litres, 10 litres and 20 litres.

For application instructions and other information, please refer to the Technical Data Sheet.

  1. Preparation: Before starting your project, ensure the surface is clean, sound, and dry. If you're working on pre-painted or glossy surfaces, sand them to create a suitable key for the paint. Any damage should be repaired with a suitable filler. For optimal results, apply at least one coat of Stonelux Primer to the prepared surface.
  2. Application: Stir The Stone Range paint well before use. You can apply it using an economy natural bristled brush, foam roller, or spray equipment. For consistent and thorough coverage, apply a minimum of three coats. Be careful to avoid overspreading the paint and refrain from over-brushing or rolling. If brush marks remain visible, finish the surface with stippling. Allow 2-3 hours of drying time between each coat.
  3. Spraying: If you choose to spray the paint, use a minimum nozzle size of 1.8mm. The paint can be diluted with no more than 20% water for spraying applications.
  4. Finishing: After applying the final coat, ensure that the paint is fully dry before touching or applying any pressure to the surface. The paint should be touch dry before applying subsequent coats.

Colours displayed on screen will vary from colour of paint - we recommend ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

AVAILABLE COLOURS

Colours displayed on screen will vary from colour of paint - we recommend requesting a hand-paint colour chart or ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

AVAILABLE FINISHES

Colours displayed on screen will vary from colour of paint - we recommend requesting a hand-paint colour chart or ordering a sample pot. Different application methods can cause slight variations in shade. For more information visit our colour accuracy page.

SIMPLY STONE

SIMPLY STONE™ contains high-quality ground stone to create an authentic matt stone finish that compliments both traditional and contemporary designs.  The uniform texture and colour provides a warm and inviting natural look that maintains all the class and character of traditional stonework.

STONE FLECKS

The same beautiful textured finish as SIMPLY STONE™, but with additional stone flecks for a more naturally speckled appearance.  STONE FLECKS™ creates a stone finish full of depth that will add immense character, warmth and authenticity to any project.

ANTIQUED STONE

A classic stone finish that contains natural ground stone, combined with large stone flecks to create a simulated aged stone appearance. The prominence of the flecks provides the appearance of stonework that has been naturally altered by the passage of time, for a worn rustic feel with vintage charm.

SMOOTH STONE

The least textured of our stone finishes acquires its elegant stone appearance from natural stone flecks. Creates a matt stone effect finish that is naturally lighter in texture, uniform in colour and has a soft appearance that is pleasing to both the eye and touch.

CUSTOMER REVIEWS