10 Litre Fireplace Stone Coating - Stone Effect Fireplace Paint
A cost effective alternative to replacing your existing fireplace, back panel or hearth.
- Authentic stone finish
- Contains natural ground stone for an autentic look and feel
- Save money - the benefits of a new surround without the cost
- Easy to apply
- Washable, eco-friendly & low odour
A water-based, durable, stone effect fireplace paint specially formulated for application onto fire surrounds, back panels and hearths. Our unique and exclusive ground stone formulation provides a very hard-wearing , breathable, stone effect finish that looks and feels like natural stone.
Stonelux Fireplace Paint is a cost effective alternative to replacing your existing fireplace, back panel or hearth.
Wood & Wood Finishes, Marble, Plaster, Masonry & Brickwork, Granite, MDF, Stone, Tiles, Resin, Concrete, Pre-Painted Surfaces
1L, 2.5L, 5L, 10L, 20L
Brush, roller or spray. We recommend natural bristled economy paintbrushes for use with all Stonelux Paints.
Washable once cured. Clean brushes with water.
COLOURS & FINISHES
Colours displayed on screen may vary from the colour of the stone paints due your individual screen settings. We recommend you request a hand-painted Stonelux Colour Chartolour chart.
Prepare all surfaces well. Ensure the surface is clean, sound and dry. Repair any damage with a suitable filler. Sane pre-painted and glossy surfaces. Apply at least one coat of Stonelux Primer & Undercoat.
Stir well before use. Apply using an economy natural bristled brush or a roller. Apply a MINIMUM of 3 even coats. Avoid overspreading. Leave 2-3 hours drying time between coats. Do not over brush/roll. If brush marks remain, finish with stippling before final coat dries.
Stir well before use. Apply 2-3 full and even coats to the surface. Wet film thickness should be between 300 and 500µm. Do not over coat on corners or joints. Allow 2-3 hours drying time between coats. Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish). Nozzle size: 1.8-2.5mm (gravity fed gun) or 2-5mm (texture gun). Paint can be diluted using no more than 20% water.
- Apply a minimum of 3 coats
- Use an economy natural bristled brush
- Drying time can be reduced by circulating warm air around the painted surface