Fireplace Stone Coating - Stone Effect Fireplace Paint
Fireplace Stone Coating - Stone Effect Fireplace Paint
Transform your new or existing fireplace into an elegant stone feature using Fireplace Stone Coating, the stone effect fireplace paint.
A water-based, stone effect, fireplace paint specially formulated for application onto fire surrounds.
Suitable for gas, electric & inglenook surrounds, back panels and heaths.
- Quick drying & easy to apply. All instructions are on the tin - no fuss, no mess.
- A cost effective alternative to a new stone surround.
- All the benefits of a new fireplace without the cost or the mess.
- Made from real ground stone to give you a truly authentic & quality finish which looks, and feels like natural stone.
- Environmentally friendly - water based, low VOC.
Further Information
Suitable Materials
- Wood & Wood Finishes
- Marble
- Plaster
- Masonry & Brickwork
- Granite
- MDF
- Stone
- Tiles
- Resin
- Concrete
- Pre-Painted Surfaces
Properties
Drying Time: In normal drying conditions allow a minimum of hours drying time between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.Composition: Water-based
Coverage: 1 litre will complete (with the recommended 3 coats) an area approximately 2.5 meters squared. Coverage can vary depending on the condition and porosity of the substrate.
VOC Content: Minimal VOC content. This product contains max 6g/l VOC.
Application
By Brush
- Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
- Using a natural soft bristled brush, apply an even, full, coat of Primer in the correct shade, to all surfaces. Allow 1-3 hours to dry depending on conditions. A second coat of primer can be applied where there is a significant colour change.
- Using a natural soft bristled brush, lay an even, thin coat of StoneLux onto the surface. Do not over brush. Apply a MIMIMUM of 3 coats, allowing 1 - 3 hours drying time between coats, depending on conditions. If brush strokes remain, finish with light brush strokes or stippling. Fully cured in 72 hours.
By Spray
- Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
- Using a gravity fed spray gun, apply an even, full, coat of primer in the correct shade to all surfaces. Wet film thickness should be between 150 and 200µm with no over coating on corners or joints. Allow 1 to 3 hours drying time, depending on conditions.
- Using a gravity fed spray gun, apply 2 - 3 even, full, coat of StoneLux to all surfaces. Wet film thickness should be between 300 and 500µm with no over coating on corners or joints. Allow 2-3 hours to dry, depending on conditions. Fully cured in 72 hours.
- Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish).
- If using a gravity fed gun, use a nozzle size between 1.8-2.5mm using a texture gun, use a nozzle size between 2-5mm.
- If necessary, StoneLux can be diluted, using no more than 20% water.
CUSTOMER REVIEWS
- Reviews
- Questions
Excellent Product
Very easy to order and quick delivery
Amazing results
Used primer and the Lamport stone paint to spruce up two done fireplaces heavily marked with soot stains and burn/ash marks . Amazing results , both fireplaces are like new. Used 2 coats of primer and 3 of paint with no smell . Prompted us to re black the wood burners and give wall a lick of paint too.
Great
Black to sandstone
Good, three coats of primer and three of top coat did the job.
Good product, poor container
The paint is good quality and provides an authentic stone finish. The only disappointment was the plastic container. It was so flimsy the lid broke trying to get it off. Considering the paint is incredibly expensive, I would have expected better packaging.
Unexpectedly brilliant
I must admit to having some reservations about using this product on my fireplace tiles. However, they were so hideous that I really didn’t have anything to lose in trying it. It is now a few weeks since I applied it; I didn’t want to do a review before finding out if it stayed stuck to the tiles. It does stay on and looks fabulous. I’m a very happy customer.
RECOMMENDED PRODUCTS