Garden Stone Coating
Garden Stone Coating
A high performance, stone effect paint, that gives a stone effect to garden items, such as, terracotta pots, wooden planters, garden ornaments, concrete, fence posts and balustrades.
Our water-based, durable and weather resistant paint looks and feels like natural stone, at a fraction of the cost.
- Unique ground stone formulation creates a truely authentic stone finish.
- The appearance of real stone at a fraction of the cost.
- Decorative, hard wearing and UV stable
- Weatherproof
COLOURS
FINISHES
Colours displayed on screen may vary from the colour of the stone paints due your individual screen settings. We recommend you request a hand-painted Stonelux Colour Chart.
Further Information
Suitable Materials
- Wood & Wood Finishes
- Concrete
- Terracotta
- Masonry & Brickwork
- Stone
- MDF
- Pre-painted Surfaces
- Tiles
- Resin
- Pre-Painted Surfaces
Properties
Drying Time: In normal drying conditions allow a minimum of hours drying time between coats. Drying time can be reduced by circulating warm air around the painted surface. Completely cured within 72 hours under normal conditions.Composition: Water-based
Coverage: 1 litre will complete (with the recommended 3 coats) an area approximately 2.5 meters squared. Coverage can vary depending on the condition and porosity of the substrate.
VOC Content: Minimal VOC content. This product contains max 6g/l VOC.
Application
By Brush
- Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
- Using a natural soft bristled brush, apply an even, full, coat of Primer in the correct shade, to all surfaces. Allow 1-3 hours to dry depending on conditions. A second coat of primer can be applied where there is a significant colour change.
- Using a natural soft bristled brush, lay an even, thin coat of StoneLux onto the surface. Do not over brush. Apply a MIMIMUM of 3 coats, allowing 1 - 3 hours drying time between coats, depending on conditions. If brush strokes remain, finish with light brush strokes or stippling. Fully cured in 72 hours.
By Spray
- Stir thoroughly before application. To achieve a professional stone effect finish, prepare all surfaces well. Ensure the area is clean, sound and dry. Repair any damage with a suitable filler. Sand pre-painted and lacquered surfaces.
- Using a gravity fed spray gun, apply an even, full, coat of primer in the correct shade to all surfaces. Wet film thickness should be between 150 and 200µm with no over coating on corners or joints. Allow 1 to 3 hours drying time, depending on conditions.
- Using a gravity fed spray gun, apply 2 - 3 even, full, coat of StoneLux to all surfaces. Wet film thickness should be between 300 and 500µm with no over coating on corners or joints. Allow 2-3 hours to dry, depending on conditions. Fully cured in 72 hours.
- Various psi settings can be used for a light or heavy finish (approx. 60psi for a medium textured finish).
- If using a gravity fed gun, use a nozzle size between 1.8-2.5mm using a texture gun, use a nozzle size between 2-5mm.
- If necessary, StoneLux can be diluted, using no more than 20% water.
Limestone
Magna Sandstone
Buff Sandstone
Rich Buff Sandstone
Grey Limestone
Black Pearlstone
Limestone Fleck
Magna Fleck
Buff Sandstone Fleck
Rich Buff Fleck
Grey Limestone Fleck
Black Pearlstone Fleck
Red 1/28
Red 2/27
Red 3/14
Red 4/13
Red 5/60
Red 6/62
Red 7/61
Red 8/66
Red 9/67
Yellow 1/34
Yellow 2/52
Yellow 3/32
Yellow 4/06
Yellow 5/17
York Stone
Bath Sandstone
Cumbrian Slatestone
Welsh Slatestone
Fired Red Brick
Terracotta Red
Light Beige
Medium Red
Dark Red
Light Red
Red 5/60
Red 6/62
Red 7/61
Red 8/66
Red 9/67
Medium Beige
Grey
Light Buff
FINISH: SIMPLY STONE in LAMPORT
OUR ORIGINAL AND MOST POPULAR STONE EFFECT PAINT
Simply Stone is made using natural ground stone for a truly authentic and quality stone effect finish. A highly breathable paint with a stunning stone appearance.
FINISH: STONE FLECKS in LAMPORT
A STONE EFFECT PAINT WITH MORE DEPTH
The same formulation as our Simply Stone but with additional black and silver flecks for that extra oomph.
FINISH: SMOOTH STONE in LAMPORT
OUR SMOOTH FINISH IS EXACTLY THAT, SMOOTH!
Unlike our other finishes, Smooth Stone does not contain any natural ground stone, but instead gains its stone appearance from the fleck materials it contains. Resulting in a less textured but beautifully authentic stone finish
FINISH: ANTIQUED STONE in LAMPORT
SPECIALLY FORMULATED FOR A CLASSICAL AGED APPEARANCE
Our unique Antiqued Stone finish contains ground stone and multiple size natural flecks, making it ideal for replicating the intricate detail of processed aged stone.
CUSTOMER REVIEWS
- Reviews
- Questions
Poor service
Had to chase order and company do not stand by their published delivery. Still awaiting delivery after day 5.Staff 'customer service' attitude is take it or leave it !!
United KingdomGreat product
This is the third product I have bought from Stonelux and, although they might not be the cheapest, they do exactly what I require. Very pleased with the results and worth every penny!
United KingdomStone wall paint
This paint is amazing. good coverage, withstands all weather's... it doesn't fade or chip, I ordered another tin of "magna sand" paint to touch up a different area of the garden to match the other stone walls that I've previously painted. It's gets 10 out of 10 from me
United KingdomStone coating paint
Excellent! It was to improve a plastic Terracotta warrior in the garden. Has done the job extremely well.
United KingdomThe Third Year I have purchased Garden Stone coating
I found the paint very easy to use - also it has transformed my patio area.
United KingdomExcellent prduct
Two coats and it Wasa perfect job.
RECOMMENDED PRODUCTS